Endress+Hauser iTEMP TMT84 - Page 92

11 Operation using PROFIBUS
®
PA TMT84
92 Endress + Hauser
11.4.5 Transducer Block slot 2
Transducer Block slot 2 contains the same parameters as Transducer Block slot 1. The settings in
slot 2 affect sensor input 2.
POLY_COEFF_B 153 X X Simple Float 4 S M
POLY_COEFF_C 154
X X Simple Float 4 S M
POLY_COEFF_R0 155
X X Simple Float 4 S M
POLY_MEAS_RANGE_MAX 156
X - Simple Float 4 S M
POLY_MEAS_RANGE_MIN 157
X - Simple Float 4 S M
not used 158 - 161 – – – – – – –
CORROSION_DETECTION 162
X X Simple Unsigned 8 2 S M
CORROSION_CYCLES 163
X - Simple Unsigned 8 2 S M
SENSOR_DRIFT_ALERT_VALUE 164
X X Simple Float 4 S M
not used 165 - 168 – – – – – – –
RJ_MAX_SENSOR_VALUE 169
X - Simple Float 4 N M
RJ_MIN_SENSOR_VALUE 170
X - Simple Float 4 N M
not used 171 – – – – – – –
TEMPERATURE_THRESHOLD 172
X X Simple Float 4 S M
RJ_OUT 173
X - Record 101 5 D M
SENSOR_RAW_VALUE 174
X - Simple Float 4 D M
not used 175 - 219 – – – – – – –
VIEW_TRANSDUCER_BLOCK 220 X - Simple
Unsigned16,
DS-37, DS-42,
101,
Unsigned8,
Unsigned8
20 DM
Name
Index Read Write Object Type Data Type Byte Size Storage Class Parameter
All parameters seeChapter 11.4.4 70-220 – – – – – – –
Name
Index Read Write Object Type Data Type Byte Size Storage Class Parameter