Levelflex FMP51, FMP52, FMP54
20 Endress+Hauser
Transducer Blocks
Block Content Output values
Setup Transducer Block Contains all parameters for a standard commissioning
procedure
• Level or volume
1)
(Channel 1)
• Distance (Channel 2)
Advanced Setup
Transducer Block
Contains all parameters for a more detailed
configuration of the device
no output values
Display Transducer Block Contains all parameters for the configuration of the
display module
no output values
Diagnostic Transducer
Block
Contains diagnostic information no output values
Expert Configuration
Transducer Block
Contains parameters which require detailed
knowledge of the functionalities of the device
no output values
Expert Information
Transducer Block
Contains information about the state of the device no output values
Service Sensor Transducer
Block
Contains parameters which can only be operated by
Endress+Hauser service personnel
no output values
Service Information
Transducer Block
Contains information on the state of device which is
relevant for service operations
no output values
Data Transfer Transducer
Block
Contains parameters which allow to backup the device
configuration in the display module and to restore it
into the device.
no output values
1) depending on the configuration of the block
To Next Page
Loading...
