Levelflex M FMP41C with HART/4...20 mA Commissioning
Endress + Hauser 39
6.3 Basic Setup
L00-FMP41Cxx-19-00-00-en-001
SD
UB
F
L
D
E
LN
LB
flange:
referencepoint of
measurement
tank shape
Standard
measuring cond.
Unknown
measuring cond.
Standard
mapping
safety settings
linearisation
extended calibr.
...
empty calibr.
full calibr.
(description see BA 245F)
basic setup (standard)
option
E = empty calibr. (= zero) LN = probe length
setting in 005 setting in 033
F = full calibr. (= span) UB = upper blocking distance
setting in 006 setting in 059
D = distance (distance flange / product) SD = safety distance
display in 0A5 setting in 015
L = level LB = lower blocking
display in 0A6 distance
To Next Page
Loading...
