Accessories Levelflex M FMP41C with HART/4...20 mA
64 Endress + Hauser
Isolated tie down
Mounting-kit Order - No.
L00-FMP4xxxx-17-00-00-en-036
for 4mm rope probe 52014249
for 6mm rope probe 52014250
If a rope probe has to be fixed and asecure grounded
mounting is not possible, we recommend using the insulating
sleeve made of PEEK-GF30 with accompanying DIN 580
eye-bolt made of stainless steel.
Max. process temp.150 °C.
Due to the risk of electrostatic charge, theinsulating sleeve is
not suitable for use inhazardous areas.In these cases the
fixing must be reliably grounded (→ ä 19).
D
Insulating
sleeve
Reliable, isolated mounting
eye-bolt
D = 20 mm at
M8 DIN 580 for 4 mm rope
D = 25 mm at
M10 DIN 580 for 6 mm rope
To Next Page
Loading...
