Levelflex M FMP40 FOUNDATION Fieldbus Commissioning
Endress+Hauser 75
Basic setup step 6/6:
• Interference echo suppression takes place in this step
• The measured distance and the current measured value are always displayed in the header
l00-fmp4xxxx-20-00-00-en-006.gif
6.8.1 Signal analysis via envelope curve
After the basic setup, it is recommended to evaluate the measurement with the aid of the envelope
curve.
L00-FMP4xxxx-20-00-00-en-007
!
Note!
In the event of severe interference echoes, installing the Levelflex at another point can optimize the
measurement routine.
To Next Page
Loading...
Need help?
General
