Commissioning Levelflex M FMP40 and FMP45
34
Basic Setup step 1/4:
• The TAG of the measurement point can be edited.
• Additional information are displayed:
protocol and SW number
device name
order code
L00-FMP4xxxx-19-00-00-de-006
!
Note!
Each changed parameter has to be entered / confirmed by the Return key.
Basic Setup step 2/4:
• Enter the application parameters:
– Dielectric const.
– Dist. total level
l00-L00-FMP4xxxx-19-00-00-de-007
To Next Page
Loading...
