Endress+Hauser Liquiline M CM42 - Page 33

CM42-MAA101EBE00 Repair
Endress+Hauser 33
Item Kit CM42 Order number
1 Housing base, polyester, NPT ½"
•Base
• Plate NPT ½" (item 15)
• Cable mounting rail cpl. SS
• 3 threaded joints NPT ½" (item 14)
71001362
2 CPU module, curr. outp. + HART, non-Ex
• FMIH1 insertion module (FC2W1+FBIH1), nonEx
• Terminal strip (item 3)
51518002
3 Terminal set, CPU module, curr. outp. + HART 51517481
4 Ribbon cable for plastic housing
• 1 cable, conf. 40xAWG28 EX, 90 mm (3.5") crimp
51517503
5 Hinge for plastic housing
• Hinge cpl. CM42 KS
• 2 special screws K40x10 Torx self-form.
51517500
7 Top housing section, plastic, with display
• Display, keys, navigator, screws and cover plate
• Hinge (item 5)
• Ribbon cable (item 4)
71249341
8 Inp. module conductivity, conductive measurement, non-Ex
• FSLC1, insertion module, cond. conductivity, non-Ex
• Terminal strip (item 9)
51518005
8 Inp. module conductivity, inductive measurement, non-Ex
• FSLI1, insertion module, ind. conductivity, non-Ex
• Terminal strip (item 9)
51518006
9 Inp. module terminal set, conductivity, conductive measurement 51517489
9 Inp. module terminal set, conductivity, inductive measurement 51517490
10 Inp. module digital/Memosens, non-Ex
• FSDG1, insertion module, 1 channel, 1 SWU, non-Ex
• Terminal strip (item 11)
51518007
11 Inp. module terminal set, digital/Memosens 51517491
12 Inp. module pH/ORP/temperature, non-Ex
• FSPH1, insertion module, pH/mV, non-Ex
• Terminal strip (item 13)
51518004
13 Inp. module terminal set, pH/ORP/temperature 51517487
14, 15 Threaded joints, NPT ½"
• 1 set of threaded joints
• Thread base plate (item 15)
51517505
No
graphic
Terminal set, 5 pcs. each for all modules, 7 types 51517498
No
graphic
10 set of cable clamps+screws
• 10 EMC cable clamps D6 (0.24")
• 10 EMC cable clamps D4 (0.16")
• 10 cheese head screws M4x8 A2
51517499