Endress+Hauser Liquiline M CM42 - Electrical Connection and Performance

Technical data CM42-MAA101EBE00
40 Endress+Hauser
7.4 Electrical connection
7.4.1 Supply voltage and signal voltage
a0008804
Fig. 11: Minimum supply voltage at the transmitter depending on the output current
A With HART communication
B Without HART communication
7.4.2 Certified cable glands
V
mA
10
12.5
11.5
14
15.5
16.5
18
5
3.6
6
7
8910
11 12
13
14
15 16
17
18 19 20
21 22
A
B
17
4
Cable gland Clamping area, permitted cable diameter
M16 x 1.5 mm 3 to 6 mm (0.12 to 0.24")
M20 x 1.5 mm 5 to 9 mm (0.20 to 0.35")
M20 x 1.5 mm 6 to 12 mm (0.24 to 0.47")
NPT 3/8" 3 to 6 mm (0.12 to 0.24")
NPT 1/2" 5 to 9 mm (0.20 to 0.35")
NPT 1/2" 6 to 12 mm (0.24 to 0.47")
G3/8 3 to 6 mm (0.12 to 0.24")
G1/2 5 to 9 mm (0.20 to 0.35")
G1/2 9 to 12 mm (0.35 to 0.47")
Dummy plug M16 -
Dummy plug M20 -