Endress+Hauser Liquiphant M FTL50H - Page 22

Liquiphant M FTL50(H), FTL51(H)
22 Endress+Hauser
With build-up on the tank walls:
Mounting positions with low viscosity (up to 2000 mm
2
/s):
Mounting in piping from 2"
* Ensure that there is sufficient distance between the build-up expected on the tank wall and the fork.
L00-FTL5xxxx-11-05-xx-xx-002
Vertical from above Protruding into the tank from the side
* Deburr the nozzle surfaces
L00-FTL5xxxx-11-05-xx-en-003
Fluid velocities up to 5 m/s for viscosity 1 mm
2
/s and density 1 g/cm
3
.
(Check the function for other operating conditions.)
L00-FTL5xxxx-11-05-xx-xx-004
*
*
(min. 1 in)
min. 25
*
*