Endress+Hauser Liquiphant M FTL50H - Accessories; Welding Neck G ¾; Welding Neck G 1

Liquiphant M FTL50(H), FTL51(H)
44 Endress+Hauser
Accessories
Welding neck G ¾
Welding neck G 1
* The tolerance of the defined thread beginnings between welding boss and sensor amounts to ± 15°.
Order number: 52001052
with 3.1.B material certificate: 52011897
for flush-mounting
max. 25 bar / max. 150 °C
max. 40 bar / max. 100 °C
a Liquiphant FTL50 or FTL50H
with process connection GQ2
• With defined thread start *
• Sensor cannot be positioned
Material: corrosion-resistant steel
1.4435 (AISI 316L)
Weight: 0.13 kg
Seal: silicone O-ring
Order number: 52001387
FDA approved materials according to
21 CFR Part 177.1550/2600
!
Note!
Use only for FTL50/51 and FTL50H/51H!
L00-FTL5xxxx-06-05-xx-xx-019
–0.4
ø55
21
26
ø32
G¾
ISO 228
Order number: 52001051
with 3.1.B material certificate: 52011896
for flush-mounting
max. 25 bar / max. 150 °C
max. 40 bar / max. 100 °C
a Liquiphant M
with process connection GW2
• With defined thread start *
• Sensor cannot be positioned
Material: corrosion-resistant steel
1.4435 (AISI 316L)
Weight: 0.19 kg
Seal: silicone O-ring
Order number: 52001386
FDA approved materials according to
21 CFR Part 177.1550/2600
L00-FTL5xxxx-06-05-xx-xx-020
ø60
–0.4
24.6
29.6
ø41
G1
ISO 228