Endress+Hauser Liquiphant M FTL50H - Probe Length, Electronics, and Housing Options; Probe Length Types and Electronic Insert Details; Housing, Cable Entry, and Additional Options

Liquiphant M FTL50(H), FTL51(H)
Endress+Hauser 43
!
Note!
The basic weight includes the compact sensor, thread adapter G ¾, electronic insert, steel housing
TC Length: type II*; Ra <1.5 μm/120 grit
+ pressure tight feed through
0.1 kg
+0.7 kg
TD Length: type II*; Ra <0.3 μm/320 grit
+ pressure tight feed through
0.1 kg
+0.7 kg
YY Special version
*) Replacing instruments: when vertically mounting a Liquiphant M
FTL51H with length II, the switch point is at the same height as for the
Liquiphant II FTL360, FTL365, FDL30, FDL35
40 Electronics; Output:
A FEL50A PROFIBUS PA
1 FEL51* 2-wire, 19...253 V AC
2 FEL52* 3-wire PNP, 10... 55 V DC
4 FEL54 relay DPDT, 19...253 V AC, 19...55 V DC
5 FEL55 8/16 mA, 11... 36 V DC
6 FEL56 NAMUR (L-H signal)
7 FEL57 2-wire PFM
8 FEL58* NAMUR + test button (H-L signal)
9 Special version
*) Also available in compact housing
50 Housing; Cable Entry:
C3 Compact 316L IP66/68; cable 5 m
D3 Compact 316L IP65; plug Pg11 ISO 4400
E3 Compact 316L NEMA4X; plug NPT ½ ISO 4400
N3 Compact 316L IP66/68; plug M12
E4 F16 Polyester NEMA4X; thread NPT ½ –0.1 kg
E5 F13/F17 Alu NEMA4X; thread NPT ¾ 0.4 kg
E6 F15 316L NEMA4X; thread NPT ½
E7 T13 Alu coated IP66; thread NPT ¾ 0.8 kg
separate connection compartment
F4 F16 Polyester IP66; thread G ½ –0.1 kg
F5 F13/F17 Alu IP66; thread G ½ 0.4 kg
F6 F15 316L IP66; thread G ½
F7 T13 Alu coated IP66; thread G ½ 0.8 kg
separate connection compartment
G4 F16 Polyester IP66; gland M20 –0.1 kg
G5 F13/F17 Alu IP66; gland M20 0.4 kg
(EEx d > thread M20)
G6 F15 316L IP66; gland M20
G7 T13 Alu coated IP66; gland M20 0.8 kg
separate connection compartment (EEx d > thread M20)
N4 F16 Polyester IP66; plug M12
N5 F13/F17 Alu IP66; plug M12
N6 F15 316L IP66; plug M12
Y9 Special version
60 Additional Option:
A Basic version
B CoC, EN 10204 - 3.1 material (316L wetted parts)
Inspection certificate
C EN 10204 - 3.1 material (316L wetted parts)
Inspection certificate
S GL/ABS marine certificate (FTL51H: max. 1600 mm)
Y Special version
FTL5#H - Complete product designation
30 Probe Length; Type: