Endress+Hauser Micropilot FMR67 - Page 73

Micropilot FMR67
Endress+Hauser V. 1, Rev. 3, 11-04-2017 73
Accessories Description
Technical data: version ASME/JIS
Order number 71249070 71249072 71249073
Compatible with • ASME 3" 150lbs
•
JIS 80A 10K
ASME 4" 150lbs ASME 6" 150lbs
Recommended screw length 100 mm (3.9 in) 100 mm (3.9 in) 110 mm (4.3 in)
Recommended screw size M14 M14 M18
Material EPDM
Process pressure –0.1 to 0.1 bar (–1.45 to 1.45 psi)
Process temperature –40 to +80 °C (–40 to +176 °F)
D 133 mm (5.2 in) 171 mm (6.7 in) 219 mm (8.6 in)
d 89 mm (3.5 in) 115 mm (4.53 in) 168 mm (6.6 in)
h 22 mm (0.87 in) 23.5 mm (0.93 in) 26.5 mm (1.04 in)
h
min
14 mm (0.55 in) 14 mm (0.55 in) 14 mm (0.55 in)
h
max
30 mm (1.18 in) 33 mm (1.3 in) 39 mm (1.45 in)