Endress+Hauser Micropilot FMR67 - Materials: Antenna and Process Connection

Micropilot FMR67
Endress+Hauser V. 1, Rev. 3, 11-04-2017 51
Nr. Part Material
8 Ground terminal • Screw: A2
•
Spring washer: A2
• Clamp: 304 (1.4301)
• Holder: 304 (1.4301)
9 Adhesive nameplate Plastic
1) For the version with M12 plug the sealing material is Viton.
2)
For the version with 7/8" plug, the sealing material is NBR.
Materials: antenna and
process connection
FMR67
B
A
1
2
3
4
5
6
1
2
3
4
6
5
A0031816
A Antenna Drip-off DN50
B Antenna flush mount DN80
No. Component part Material
1 Antenna PTFE
Seals Viton: FKM
2 Flange / process connection A (antenna Drip-off DN50): PP
B (antenna flush mount DN80): 316L / 1.4404
3 Antenna adapter,
housing adapter
316L / 1.4404
4 Housing seal EPDM
5 Threaded adapter,
screw plug
316L / 1.4404
6 integrated purge air adapter 316L / 1.4404
Threaded fasteners A4-70
A2-70
7
C
1
2
3
4
5
6
A0032126
C Antenna flush mount DN80 with alignment device