Proline Promag P 100 Operation options
Endress+Hauser 37
Header
The following information appears in the header:
•
Device tag (→ 42)
• Device status with status signal
• Current measured values
Function row
Functions Meaning
Measured values The measured values of the device are displayed
Menu Access to the operating menu structure of the device, same as for the operating tool
Device status Displays the diagnostic messages currently pending, listed in order of priority
Data management
• Data exchange between PC and measuring device:
–
Upload the configuration from the device (XML format, create configuration backup)
– Save the configuration to the device (XML format)
– Export the event list (.csv file)
– Export parameter settings (.csv file, create documentation of the measuring point)
– Export the Heartbeat verification log (PDF file, only available with the "Heartbeat
Verification" application package)
• Upload the EDS system file from the device
Network
configuration
Configuration and checking of all the parameters required for establishing the connection to the
device:
• Network settings (e.g. IP address, MAC address)
• Device information (e.g. serial number, firmware version)
Logout End the operation and call up the login page
8.3 Access to the operating menu via the operating tool
For detailed information about access to the operating menu via operating tool, refer to
the Operating Instructions for the device on the CD-ROM provided
8.3.1
Via service interface (CDI)
This communication interface is present in the following device version:
Order code for "Output", option M: Modbus RS485
To Next Page
Loading...
