Endress+Hauser Proline Promag P 100 Technical Information

The flowmeter for highest medium temperatures with an ultra-compact
transmitter
Application
• The electromagnetic measuring principle is unaffected by
pressure, temperature and flow profile
• Dedicated for chemical and process applications with
corrosive liquids and high medium temperatures
Device properties
• Nominal diameter: max. DN 600 (24")
• All common Ex approvals
• Liner made of PTFE or PFA
• Robust, ultra-compact transmitter housing
• Pre-configured plug connector
Your benefits
• Versatile applications – wide variety of wetted materials
• Energy-saving flow measurement – no pressure loss due to
cross-section constriction
• Maintenance-free – no moving parts
• Space-saving transmitter – full functionality on smallest
footprint
• Time-saving local operation without additional software and
hardware – integrated web server
• Integrated verification – Heartbeat Technology™
Products Solutions Services
Technical Information
Proline Promag P 100
Electromagnetic flowmeter
TI01102D/06/EN/02.13
71233384

Endress+Hauser Proline Promag P 100 Specifications

General

Measurement Principle	Electromagnetic
Housing Material	Aluminum, Stainless steel
Pressure Range	Up to 40 bar (depending on nominal diameter)
Output Signal	4-20 mA
Digital communication	HART
Lining	PTFE, PFA
Electrode material	Stainless Steel
Degree of protection	IP66/67
Accuracy	±0.5% of reading ± 1 mm/s (±0.04 in/s)
Temperature Range	-20 to +60 °C (ambient), -40 to +130 °C (process)