Endress+Hauser Proline Promag P 100 - Product Identification Methods

Proline Promag P 100
Endress+Hauser 11
Galvanic isolation
The following connections are galvanically isolated from each other:
• Outputs
• Power supply
Protocol-specific data HART
Manufacturer ID 0x11
Device type ID 0x3A
HART protocol revision 6.0
Device description files
(DTM, DD)
Information and files under:
www.endress.com
HART load Min. 250 Ω
Dynamic variables The measured variables can be freely assigned to the dynamic variables.
Measured variables for PV (primary dynamic variable)
• Off
• Volume flow
• Mass flow
• Corrected volume flow
• Flow velocity
• Corrected conductivity
• Temperature
• Electronics temperature
Measured variables for SV, TV, QV (secondary, tertiary and quaternary
dynamic variable)
• Volume flow
• Mass flow
• Corrected volume flow
• Flow velocity
• Corrected conductivity
• Temperature
• Electronics temperature
• Totalizer 1
• Totalizer 2
• Totalizer 3
PROFIBUS DP
Manufacturer ID 0x11
Ident number 0x1561
Profile version 3.02
Device description files (GSD,
DTM, DD)
Information and files under:
• www.endress.com
• www.profibus.org