Endress+Hauser Proline Promag P 100 - Protecting Settings and Write Protection

Proline Promag P 100
Endress+Hauser 45
Nominal diameter EN (DIN), AS
1)
ASME JIS
[mm] [in] Pressure rating [kg] Pressure rating [kg] Pressure rating [kg]
65 – PN 16 10 Class 150 – 10K 9.1
80 3 PN 16 12 Class 150 12 10K 10.5
100 4 PN 16 14 Class 150 14 10K 12.7
125 – PN 16 19.5 Class 150 – 10K 19
150 6 PN 16 23.5 Class 150 23.5 10K 22.5
200 8 PN 10 43 Class 150 43 10K 39.9
250 10 PN 10 63 Class 150 73 10K 67.4
300 12 PN 10 68 Class 150 108 10K 70.3
350 14 PN 10 103 Class 150 173
400 16 PN 10 118 Class 150 203
450 18 PN 10 159 Class 150 253
500 20 PN 10 154 Class 150 283
600 24 PN 10 206 Class 150 403
1) For flanges to AS, only DN 25 and 50 are available.
Weight in US units
Nominal diameter ASME
[mm] [in] Pressure rating [lbs]
15 ½ Class 150 9.92
25 1 Class 150 11.7
40 1 ½ Class 150 16.3
50 2 Class 150 19.0
80 3 Class 150 26.5
100 4 Class 150 30.9
150 6 Class 150 51.8
200 8 Class 150 94.8
250 10 Class 150 161.0
300 12 Class 150 238.1
350 14 Class 150 381.5
400 16 Class 150 447.6
450 18 Class 150 557.9
500 20 Class 150 624.0
600 24 Class 150 888.6
Measuring tube specification
Nominal
diameter
Pressure rating Process connection internal diameter
EN
(DIN)
ASME AS
2129
AS
4087
JIS PFA PTFE
[mm] [in] [bar] [psi] [bar] [bar] [bar] [mm] [in] [mm] [in]
15 ½ PN 40 Class 150 – – 20K – – 15 0.59
25 1 PN 40 Class 150 Table E – 20K 23 0.91 26 1.02
32 – PN 40 – – – 20K 32 1.26 35 1.38