Endress+Hauser Proline Promag P 100 - Pressure Tightness

Proline Promag P 100
Endress+Hauser 39
Flange connection according to AS 2129 (Table E) or AS 4087 (PN 16)
-40
-20
0 20
40 60 80 100120140 160 [°C]
0
10
5
20
15
[bar]
0-40 100 200
300 [°F]
[psi]
200
100
300
0
TableE
PN16
A0021189-EN
 26 Materials A105, S235JRG2, S275JR
Pressure tightness
"–" = no specifications possible
Liner: PFA
Nominal diameter Limit values for absolute pressure in [mbar] ([psi]) for fluid temperatures:
[mm] [in] +25 °C (+77 °F) +80 °C (+176 °F) +100 to +180 °C
(+212 to +356 °F)
25 1 0 (0) 0 (0) 0 (0)
32 – 0 (0) 0 (0) 0 (0)
40 1 ½ 0 (0) 0 (0) 0 (0)
50 2 0 (0) 0 (0) 0 (0)
65 – 0 (0) – 0 (0)
80 3 0 (0) – 0 (0)
100 4 0 (0) – 0 (0)
125 – 0 (0) – 0 (0)
150 6 0 (0) – 0 (0)
200 8 0 (0) – 0 (0)
Liner: PTFE
Nominal diameter Limit values for absolute pressure in [mbar] ([psi]) for fluid temperatures:
[mm] [in] +25 °C (+77 °F) +80 °C (+176 °F) +100 °C (+212 °F) +130 °C (+266 °F)
15 ½ 0 (0) 0 (0) 0 (0) 100 (1.45)
25 1 0 (0) 0 (0) 0 (0) 100 (1.45)
32 – 0 (0) 0 (0) 0 (0) 100 (1.45)
40 1 ½ 0 (0) 0 (0) 0 (0) 100 (1.45)
50 2 0 (0) 0 (0) 0 (0) 100 (1.45)
65 – 0 (0) – 40 (0.58) 130 (1.89)
80 3 0 (0) – 40 (0.58) 130 (1.89)
100 4 0 (0) – 135 (1.96) 170 (2.47)
125 – 135 (1.96) – 240 (3.48) 385 (5.58)
150 6 135 (1.96) – 240 (3.48) 385 (5.58)
200 8 200 (2.90) – 290 (4.21) 410 (5.95)
250 10 330 (4.79) – 400 (5.80) 530 (7.69)