Endress+Hauser Proline Promag P 100 - Diagnostic Information; Fault Display and Remedial Measures

Proline Promag P 100
46 Endress+Hauser
Nominal
diameter
Pressure rating Process connection internal diameter
EN
(DIN)
ASME AS
2129
AS
4087
JIS PFA PTFE
[mm] [in] [bar] [psi] [bar] [bar] [bar] [mm] [in] [mm] [in]
40 1 ½ PN 40 Class 150 – – 20K 36 1.42 41 1.61
50 2 PN 40 Class 150 Table E PN 16 10K 48 1.89 52 2.05
65 – PN 16 – – – 10K 63 2.48 67 2.64
80 3 PN 16 Class 150 – – 10K 75 2.95 80 3.15
100 4 PN 16 Class 150 – – 10K 101 3.98 104 4.09
125 – PN 16 – – – 10K 126 4.96 129 5.08
150 6 PN 16 Class 150 – – 10K 154 6.06 156 6.14
200 8 PN 10 Class 150 – – 10K 201 7.91 202 7.95
250 10 PN 10 Class 150 – – 10K – – 256 10.1
300 12 PN 10 Class 150 – – 10K – – 306 12.0
350 14 PN 10 Class 150 – – – – – 337 13.3
400 16 PN 10 Class 150 – – – – – 387 15.2
450 18 PN 10 Class 150 – – – – – 432 17.0
500 20 PN 10 Class 150 – – – – – 487 19.2
600 24 PN 10 Class 150 – – – – 23 593 23.3
Materials Transmitter housing
Order code for "Housing", option A "Compact, aluminum coated":
Coated aluminum AlSi10Mg
Cable entries/cable glands
1
2
3
A0020640
 28 Possible cable entries/cable glands
1 Cable entry in transmitter housing, wall-mount housing or connection housing with internal thread M20 x
1.5
2 Cable gland M20 x 1.5
3 Adapter for cable entry with internal thread G ½" or NPT ½"