Endress+Hauser Proline Promag P 100 - Weight

Proline Promag P 100
44 Endress+Hauser
DN
1)
A B C D E t
EN (DIN), JIS, AS
2)
PFA, PTFE
[mm] [mm] [mm] [mm] [mm] [mm] [mm]
450
3)
439 538 583 417 9.0 2
500
3)
493 592 650 460 9.0 2
600
3)
593 693 766 522 9.0 2
1) Ground disks DN 15 to 250 (½ to 10") can be used for all available flange standards/pressure ratings.
2) For flanges to AS, only DN 25 and DN 50 are available.
3) PN 10/16
4) PN 25, JIS 10K/20K
Dimensions in US units
DN
1)
A B C D E t
ASME PFA, PTFE
[in] [in] [in] [in] [in] [in] [in]
½ 0.63 1.69 2.42 2.87 0.26 0.08
1 1.02 2.44 3.05 3.44 0.26 0.08
1 ½ 1.61 3.23 3.98 4.06 0.26 0.08
2 2.05 3.98 4.55 4.25 0.26 0.08
3 3.15 5.16 6.08 5.31 0.26 0.08
4 4.09 6.14 7.34 6.02 0.26 0.08
6 6.22 8.54 10.08 7.24 0.26 0.08
8 8.11 10.51 11.34 8.07 0.26 0.08
10 10.24 12.91 14.13 9.45 0.26 0.08
12 12.28 14.76 16.26 10.75 0.26 0.08
14 13.50 17.05 18.86 14.37 0.35 0.08
16 15.47 18.90 21.34 15.55 0.35 0.08
18 17.28 21.18 22.95 16.42 0.35 0.08
20 19.41 23.31 25.59 18.11 0.35 0.08
24 23.35 27.28 30.16 20.55 0.35 0.08
1) Ground disks can be used for all available pressure ratings.
Weight Compact version
• Including the transmitter
• High-temperature version + 1.5 kg (3.31 lbs)
• Weight specifications apply to standard pressure ratings and without packaging material.
Weight in SI units
Nominal diameter EN (DIN), AS
1)
ASME JIS
[mm] [in] Pressure rating [kg] Pressure rating [kg] Pressure rating [kg]
15 ½ PN 40 4.5 Class 150 4.5 10K 4.5
25 1 PN 40 5.3 Class 150 5.3 10K 5.3
32 – PN 40 6 Class 150 – 10K 5.3
40 1 ½ PN 40 7.4 Class 150 7.4 10K 6.3
50 2 PN 40 8.6 Class 150 8.6 10K 7.3