Endress+Hauser Proline Prosonic Flow B 200 - Page 18

Installation Proline Prosonic Flow B 200 HART
18 Endress+Hauser
6 Installation
6.1 Installation conditions
No special measures such as supports are necessary. External forces are absorbed by the
construction of the device.
6.1.1 Mounting position
Mounting location
A0015543
Orientation
The direction of the arrow on the sensor helps you to install the sensor according to the
flow direction (direction of medium flow through the piping).
• Install the measuring device in a parallel plane free of external mechanical stress.
• The internal diameter of the pipe must match the internal diameter of the sensor:
see the "Technical Information" device document, "Design and dimensions" section.
A0015895
Orientation Compact version
A Vertical orientation
A0015545
B Horizontal orientation, transmitter
head up *
A0015589