Endress+Hauser Proline Prosonic Flow B 200 - Page 54

System integration Proline Prosonic Flow B 200 HART
54 Endress+Hauser
Burst variable 0
Burst variable 1
Burst variable 2
Burst variable 3
Burst variable 4
Burst variable 5
Burst variable 6
Burst variable 7
Burst trigger mode
Burst trigger level
Min. update period
Max. update period
Parameter overview with brief description
Parameter Description Selection / User entry Factory setting
Burst mode 1 to 3 Activate the HART burst mode for burst
message X.
• Off
• On
Off
Burst command 1 to 3 Select the HART command that is sent to the
HART master.
• Command 1
• Command 2
• Command 3
• Command 9
• Command 33
• Command 48
Command 2