Endress+Hauser Proline t-mass 65 - Pipework Requirements

Proline t-mass 65 Installation
Endress+Hauser
13
Pipe mounting
Panel mounting
A
0007544-ae
A0007543-ae
"
Caution!
Danger of overheating! If the device is mounted on a
warm pipe, make sure that the housing temperature does
not exceed +60 °C (+140 °F) which is the maximum
temperature permitted.
mm (inch)
Ø 20…70
(Ø 0.79…2.75)
~ ~ 6.1)155 (
245 (9.65)
~110 (~4.33)
210 (8.27)
+0.5 (+0.019)
–0.5 (–0.019)
+0.5 (+0.019)
–0.5 (–0.019)
mm (inch)