Endress+Hauser Prosonic M FMU40 - Remote Operation Methods; FieldCare Operating Program

Operation Prosonic M - FOUNDATION Fieldbus
36 Endress+Hauser
c. If a  symbol appears at the cursor, press F to accept the value entered; system quits edit
mode.
d. If a  symbol appears at the cursor, press F to return to the previous character (e.g. for
correction of entries).
e. O and S (= Q) interrupts selection; system quits edit mode.
4. Press F to select the next function.
5. Press O and S (= Q) once; return to previous function.
Press O and S (= Q) twice; return to Group Selection.
6. Press O and S (= Q) to return to Measured value display.
5.6 Remote operation
5.6.1 Options for remote operation
• FOUNDATION Fieldbus configuration tool (e.g. DeltaV or ControlCare)
• Handheld terminal Field Xpert SFX100
5.6.2 Parameter access by remote operation
The following parameters can be accessed by remote operation:
• Parameters of the device specific blocks (Sensor Block, Diagnostic Block, Display Block)
• Parameters of the FOUNDATION Fieldbus function blocks
L00-FMU4XXXX-02-00-00-YY-006
The highlighted parameters can be edited by remote operation.
5.7 FieldCare operating program
FieldCare is an Endress+Hauser asset management tool based on FDT technology. With FieldCare,
you can configure all Endress+Hauser devices as well as devices from other manufacturers that
support the FDT standard. Hardware and software requirements you can find on the internet:
www.endress.com ➝ select your country ➝ search: FieldCare ➝ FieldCare ➝ Technical Data.
FieldCare supports the following functions:
• Configuration of transmitters in online operation
• Singal analysis via envelope curve
• Tank linearisation
• Loading and saving device data (upload/download)
• Documentation of the measuring point
Connection options:
• HART via Commubox FXA195 and the USB port on a computer
• Commubox FXA291 with ToF Adapter FXA291 (USB) via service interface
Endress+Hauser
Service-Parameter
Sensorblock
Diagnoseblock
Display-Block
Resource Block
AI-Block 1
AI-Block 2
PID Block
Arithmetik-Block
Input-Selector-Block
Signal-Charact.-Block
Integrator-Block