Endress+Hauser Prosonic M FMU40 - Cantilever

Prosonic M - FOUNDATION Fieldbus Accessories
Endress+Hauser 71
9.4 Cantilever
L00-FMU4xxxx-06-00-00-yy-005
Dimensions in mm
• The 50 mm (2.17 in) or 62 mm (2.44 in) orifices serve for the mounting of the FMU40 or FMU41
sensor, respecitvely.
• The 22 mm (0.87 in) orifice may be used for an additional sensor.
For the mounting of the cantilever can be used:
• mounting frame  ä 72
• wall bracket  ä 72
A
DM8
35
50
20
20
105
50/
62
22
C
C
6.5
15
100
25
351007575 B
A B C D for Sensor Material Order Code
585 (23) 250 (9.84) 2 (0.08) 200 (7.87) 1½" 316Ti (1.4571) 52014132
galv. steel 52014131
2" 316Ti (1.4571) 52014136
galv. steel 52014135
1085 (42.7) 750 (29.5) 3 (0.12) 300 (11.8) 1½" 316Ti (1.4571) 52014134
galv. steel 52014133
2" 316Ti (1.4571) 52014138
galv. steel 52014137
mm (in)