Endress+Hauser Prothermo NMT81 - Page 78

Operation Prothermo NMT81
78 Endress+Hauser
• 66 (Distance tank level uncovered): Sets the distance from the liquid level for
determining whether an element above the liquid level is to be included in the average
of the vapor temperature.
Setting range: 0.0000 to 999.9999
• 67 (Distance tank level covered): Sets the distance from the liquid level for determining
whether an element under the liquid level is to be included in the average of the product
or liquid temperature.
Setting range: 0.0000 to 999.9999
• 68 (Distance water level uncovered): Sets the distance from the water level for
determining whether an element above the water level is to be included in the average
of the product temperature.
Setting range: 0.0000 to 999.9999
• 69 (Distance water level covered): Sets the distance from the water level for determining
if an element under the water level is to be included in the average of the water
temperature.
Setting range:0.0000 to 999.9999
• 70 (Hysteresis width): Sets the distance at which elements are excluded from the
average of the temperature at each phase. The distance used for determining to exclude
at element is obtained by subtracting the hysteresis width from 66, 67, 68, and 69
Setting range: 0.0000 to 999.9999
(66)
(67)
(70)
(70)
(68)
(69)
(70)
(70)
A0044837
 79 The position of the Element coverage