Endress+Hauser Prothermo NMT81 - Page 90

Operation Prothermo NMT81
90 Endress+Hauser
10.3.3 Display
Display has eight parameters to be set. This function is to set the items to be shown in the
display (option) of the device with the certain cycle. When the combination of the
temperature (°C/°F) and length (mm/in) is selected for Value 1 or Value 2, each parameter
is identified and displayed in the appropriate units.
A0044922
 96 Display screen
The pull-down menus are the same for Values 2, 3, and 4, and Decimal places 2.
10.3.4 Geolocation
When the usage location of the device is set, this can be used to confirm the maintenance
operation details, status, and unexpected events, which can help to keep the device
operating smoothly and to analyze and resolve any issues.
A0045012
 97 Geolocation screen