EasyManua.ls Logo

Endress+Hauser Turbimax CUS51D - Page 30

Endress+Hauser Turbimax CUS51D
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation Turbimax CUS51D
30 Endress+Hauser
Field of application Range Application Recommended type of
calibration
Primary sludge
extraction, primary
clarification
3 to approx.
50 g/l
Excess sludge [g/l, %TS] Two-point (outside the
process)
> approx.
50 g/l
Digested sludge[g/l, %TS] Two-point (outside the
process)
Aeration basin 0 to 5 g/l Thin sludge [mg/l, g/l] Single-point (in the
process)
2 to 15 g/l Activated sludge [mg/l, g/l]
Excess sludge
[g/l, %Ts]
Two-point (outside the
process)
Sequencing batch
reactors
0 to approx.
50 g/l
Sludge, general [mg/l, g/l, %TS]
For applications with wide dynamic range,
from clear water to high solids content
Single-point (in the
process)
Recirculation pipe 3 to approx.
50 g/l
Excess sludge [g/l, %TS] Two-point (outside the
process)
Waste activated sludge
extraction
3 to approx.
50 g/l
Excess sludge [g/l, %TS] Two-point (outside the
process)
> approx.
50 g/l
Digested sludge [g/l, %TS] Two-point (outside the
process)
Sludge thickener
(primary sludge)
3 to approx.
50 g/l
Excess sludge [g/l, %TS] Two-point (outside the
process)
> approx.
50 g/l
Digested sludge
[g/l, %TS]
Two-point (outside the
process)
Digester inlet 3 to approx.
50 g/l
Excess sludge [g/l, %TS] Two-point (outside the
process)
> approx.
50 g/l
Digested sludge
[g/l, %TS]
Two-point (outside the
process)
Digester outlet (sludge) > 5 g/l Digested sludge [g/l, %TS] Two-point (outside the
process)
3 to
maximum
50 g/l
Excess sludge
[g/l, %TS]
Two-point (outside the
process)
WWTP outlet 0 to 5 g/l Formazine [FNU, NTU], Thin sludge [mg/l,
g/l]
Kaolin
[mg/l, g/l]
Single-point (in the
process)
Sand filter monitoring 0 to 5 g/l Formazine [FNU, NTU], Thin sludge [mg/l,
g/l]
Single-point (in the
process)
Preferred applications are highlighted in bold.
Application: process water
Field of application Range Application Recommended type of
calibration
Silicon dioxide process
water
0 to 5 g/l Formazine [FNU, NTU],
Thin sludge
[mg/l, g/l], Kaolin [mg/l, g/l])
Single-point (in the
process)
Silicon dioxide process
sludges
5 to 100 g/l SiO2 [ppm, g/l] Two-point (outside the
process)
Titanium dioxide
process water
0 to 1 g/l Formazine [FNU, NTU],
Thin sludge
(mg/l, g/l), Kaolin [mg/l, g/l])
Single-point (in the
process)

Other manuals for Endress+Hauser Turbimax CUS51D

Related product manuals