Enerdrive DC2DC - CH1 Lithium Charging Current Setting; CH1 Lithium Battery Termination Current Setting

Press SEL
to enter Max
Current Menu
Press SEL
to enter
Termination
Current Menu
Press SEL
to change
current
Press SEL
to change
current
Press SEL
to change
current
Press SEL
to change
current
Press SEL
to change
current
NOTE: At any function setting, pressing the MENU button will exit the function mode.
WARNING: FIRE HAZARD
When using the Lithium Battery type setting to set the battery charging parameters, please consult the battery manufacturer on all the
voltage and current settings. Using the wrong setting to charge battery may overcharge, damage the battery and may cause a re.
CH1 LITHIUM
CHARGING CURRENT
CH1 LITHIUM BATTERY
TERMINATION CURRENT
Press SET to keep the current setting and toggle to the next menu Press SET to keep the current setting and toggle to the next menu
Press SET to keep the current setting and toggle to the next menu Press SET to keep the current setting and toggle to the next menu
Press SET to keep the current setting and toggle to the next menu Press SET to keep the current setting and toggle to the next menu
Press SET to keep the current setting and toggle to the next menu
Press SET to keep the current setting and toggle to the next menu Press SET to keep the current setting and toggle to the next menu
Press SEL
to return to
change current
Press SEL to return to change current
Press MENU to exit settings