1. Safety
SAVE THESE INSTRUCTIONS: This document contains important safety instructions that must be
followed during the installation, servicing, and maintenance of the product. Keep it in a safe place. Review
the drawings and illustrations contained in this document before proceeding. If there are any questions
regarding the safe installation or operation of this product, contact Alpha Technologies Ltd. or the nearest
Alpha® power system representative.
Safety wording and symbols
To reduce the risk of injury or death, and to ensure the continued safe operation of this product, the
following symbols have been placed throughout this document. Where these symbols appear, use extra
care and attention.
Attention: The use of attention indicates specific regulatory or code requirements that may affect the
placement of equipment or installation procedures.
Note: Notices provide additional information to help complete a specific task or procedure.
Important: Follow the prescribed procedures to avoid equipment damage or service interruption.
CAUTION: Cautions indicate safety information intended to PREVENT DAMAGE to material or
equipment.
Warning: Warnings present safety information to PREVENT INJURY OR DEATH to personnel.
CAUTION: HOT! The use of Hot presents safety information to PREVENT BURNS to the technician
or user
General warning and cautions
Warning: You must read and understand the following warnings before installing the system and its
components. Failure to do so could result in personal injury or death.
• Read and follow all instructions included in this manual.
• Only trained personnel are qualified to install or replace this equipment and its components.
• Use proper lifting techniques whenever handling equipment, parts, or batteries.
Page 6 0350114-J0 Rev N