Displays 2
nd
incoming call information on the same phone line when
1
st
call is in progress (needs Call Waiting with Caller ID service from
local telephone company)
If behind a PBX or Key system, Caller ID information will only
be recognized if the PBX or Key system passes that information
through the analog ports.
Name Tagging with Caller ID(For DuraFon PRO only)
Matches the Caller ID with the phone book entries; once matched,
the LCD screen will display the name or nickname instead of pure
Caller ID info (needs Call Waiting with Caller ID service from local
telephone company)
If behind a PBX or Key system, Caller ID information will only
be recognized if the PBX or Key system passes that information
through the analog ports.
DND (Do Not Disturb, i.e., Silent Ring)
Silences the incoming call ring for current call only.
Three Call Logs(For DuraFon PRO only)
Called Log: Stores 10 phone numbers (up to 28 digits each)
dialed most recently. Can perform last-number redial on all 10
numbers.
Received Call Log: 10 entries (14-digit phone number, 14-
character names, and time stamp), needs Caller ID service from
local telephone company.
Missed Call Log: 10 entries (14-digit phone number, 14-
character names, and time stamp), needs Caller ID service from
local telephone company.
Phone numbers and names can be saved into phonebook while
in display.
If behind a PBX or Key system, Caller ID information will only
be recognized if the PBX or Key system passes that information
through the analog ports.
Dialing Prefix(For DuraFon PRO only)
Up to 14 digits, including pause(s), one access code can be pre-
programmed to be added automatically in front of the dialed
number when dialing from call logs, phonebook, and dial-and-send
dialing.