EnGenius DuraFon PRO - Call Hold, Mute, Transfer, Conferencing, Line Selection

17
10.
Call Hold(For DuraFon PRO only)
a.
Places call on hold
b.
Battery Hot Swap: Change battery while call is on hold.
11.
Mute
12.
Phonebook
a.
90 entries, each stores a phone number or handset ID (up to
28-digit) and name (up to14-character)
b.
Alphabetically sorted display and searched by letter
c.
Dial from display
d.
During the stand-by mode, you can enter the phonebook by
pressing or scrolling key
e.
Phone book transfer via air
i. Transfer specific phonebook to one handset or all
registered handsets
ii. Transfer all phonebooks to one handset or all registered
handsets
Re:For DuraWalkie, it can only store 2-digit handset ID(or Group ID).
13.
Key Tone
a.
Three key-tone volume selections (high/low/off)
b.
Four key-tone type selections
14.
Call Timer(For DuraFon PRO only)
a.
Display call time duration for current call during and
immediately after the call
15.
Call Transfer
a.
Direct Transfer: transfer a telephone call to another handset
without announcement.
b.
Announced Transfer: speak to the destination handset before
transferring a telephone call.
16.
Call Conferencing(For DuraFon PRO only)
a.
2-handset and 1-line conferencing (Applied for DuraWalkie
too).
b.
1-handset and 2-line conferencing.
17.
Line Selection (For DuraFon PRO only)
When enabled from the handset menu, a handset user will be