EnGenius DuraFon PRO - Page 65

65
ii. Press SAVE (Left) soft key to save setting.
6. Press 6 to register or de-register handset: See Handset Registration.
7. Press 7 to set up the intercom or broadcast via repeater(see Repeater Setup).
8. Item 8 is to add new bases.
From an administrator handset (Handset 10 or 11) to set new
Base 01~07. Maximum additional bases is up to 8. Before adding
a new base, the Handset must be registered in master base(Base
ID =00).
a.
Press REG button on new Base.
b.
Use Handset 10 or 11 to Add base: Press MENU 8  1
c.
Enter 01~07 (base ID)
9. Press 9 to change system and Line setting: See system setting and Line Setting.