4. Press 4 to set sound-related settings:
a. Press 1 to select ringer volume: Use or to scroll through 6
options: Low, Medium, High, Vibrate, Vib and Ring, Off. Press SAVE (Left)
soft key to save selection. Default = High.
b. Press 2 to select ringer tone: Use or to scroll through 4
options: 0, 1, 2, and 3. Press SAVE (Left) soft key to save selection. Default
= 0.
c. Press 3 to select key volume when a key is pressed: Use or to
scroll through 3 options: High, Low, and Off. Press SAVE (Left) soft key to
save selection. Default = Low.
d. Press 4 to select key tone: Use or to scroll through 4 options:
0, 1, 2, and 3. Press SAVE (Left) soft key to save selection. Default = 0.
5. Press 5 to change handset settings:
a. Press 1 to Group Select: see Handset Group Subscription.
b. Press 2 to clear phonebook:
i. Press 1 and confirm to delete the entire phonebook.
c. Press 3 to change the power-up LCD display to show, e.g., customer name
or other greeting message:
i. Use or to move the cursor backward or forward to insert
(to the left of the cursor) or delete (the character above the cursor, or
left of the cursor if cursor is on the right of the last character).
ii. Enter characters using the Character Table and method discussed in
the Phonebook section.
iii. When finished, press SAVE (Left) soft key to save change.
d. Press 4 to change LCD display contrast:
i. Use or to scroll through values 1 to 8. Pick one that is
most suitable to you. Default = 6.
ii. Press SAVE (Left) soft key to save setting.
e. Press 5 to change the LCD backlight:
i. Use or to scroll through options: On, Off, and 20 Seconds.
Default = 20 seconds, meaning that the backlight is always on. The
20-second option will turn off the backlight after 20 seconds of
inactivity.
ii. Press SAVE (Left) soft key to save setting.
f. Press 6 to change Language:
i. Use or to scroll through options: English, Spanish and
French. Default = English, meaning the LCD display shows in English.
To Next Page
Loading...
