WDS Bridge Mode is unlike Access Point Mode. APs linked by WDS are using the
same wireless channel, and connecting excessive numbers of APs on the same channel may
result in lower throughput. Please be aware to avoid loop connections; otherwise enable the
Spanning Tree Function.
2.5 Client Router Mode
In the Client Router Mode, the ENH200EXT features an active DHCP server that allows WLAN
clients to share the same Internet connection. Ideally, have clients wirelessly connect to an
AP/WISP and connect to LANs via Ethernet. Client Router Mode is different from the AP
Router Mode. It is not a common application however useful when connects to WISP AP.
To Next Page
Loading...
