EnGenius ENH200EXT - Specifications

Appendix B – Specifications
Standard: IEEE 802.11 b/g/n
Physical Interface: - 1 x Port with PoE support
- 1 x Reset
Max. Data rate: 150 Mbps
LEDs status: - Power Status
- LAN1/LAN2 (10/100Mbps)
- WLAN (Wireless is up)
- 3 x Link Quality (Client Bridge mode)
Security: - WEP Encryption-64/128/152 bit
- WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
- WPA/WPA2 Enterprise (WPA-EAP using TKIP)
- 802.1x Authenticator
- Hide SSID in beacons
- MAC address filtering, up to 50 field
- Wireless STA (Client) connected list
Power Requirements: - Active Ethernet (Power over Ethernet)
- Proprietary PoE design
- Power Adapter 24VAC / 0.6A
Antenna:
Antenna Connector:
N/A
RP-SMA
Package Contents: - Wireless Long Range 11N AP/CB (ENH200EXT)
- PoE Injector (EPE-24R)
- Power Adaptor
- CD with User’s Manual
- QIG
- Mounting Set
- Special Screw Set
Certifications: FCC, CE, IC
RADIO FREQUENCY BAND
Channel
Tx Avg. Power
Optimal (dBm)
Rx Sensitivity
Optimal (dBm)
802.11b(2.412 ~ 2.472GHz)
1Mbps: 27 -97
2Mbps: 27 -95
5.5Mbps: 27 -92
11Mbps: 27 -89