4.2 System Setup
The following sections explain the features and functionality of the EnStation2 in access point mode, client bridge mode, WDS
access point mode, WDS bridge mode, WDS station mode and client router mode.
4.2.1 Configuring Operation Mode
Set the primary function of the device by choosing the operation mode. The function that is selected affects which items are
available in the main menu:
Device Name
Enter a name for the device. The name you type appears in
SNMP management. This name is not the SSID and is not
broadcasted to other devices.
Operation Mode
Use the radio button to select an operating mode.
Click Save & Apply to save changes or Cancel to abort.
To Next Page
Loading...