Enovation Controls Murphy PowerView PV485 - Popup Message Screen

2021-0306-2507 13 00-02-1207
Status Icon
Description
DPF Regeneration set to Inhibit – Displays when the machine or the
operator has inhibited regeneration
Maintenance / Service Required
Check Engine / Protect
Parking Brake Engaged
Transmission Neutral
Stop engine.
Air filter
Fuel filter
Coolant level
Coolant temperature
Inducement warning (FPT only)
Popup Message Screen
When the a popup message is showns screen shows, the user must acknowledge it by
pressing the button 1 to cancel or button 5 to accept, then the popup message screen will
clear. Please pay attention to the indicated messages.