EasyManua.ls Logo

Enovation Controls Murphy PowerView PV485 - Engine and System Configuration; Engine and System Settings

Enovation Controls Murphy PowerView PV485
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2021-0306-2507 19 00-02-1207
Step
Action
1
Select Display Settings, then Clock from the Main Menu.
2
The next screen highlights the hour. Adjust this using Buttons 2 and/or 4.
3
To move to the next field, press Button 5.
4
Adjust the minutes. Press Button 5.
5
Select between AM or PM. Press Button 5.
6
(Optional Step) Change between 12HR and 24HR using Buttons 2 or 4.
7
Pressing Button 3 will display popup messages will show ask to confirm or
cancel the new clock settings. set the time and clock settings.
8
Exit the Menu by pressing Button 1.
View Service Reminder
This selection exists to showsdisplays the remaining hours left until service is needed for the
Air filter, Battery life, Belt life, Fuel filter, Oil filter, Oil life and Overhaul. To cChange or reset
the service hours via the Ssystem Ssettings menu.
Engine Settings
The Engine Settings menu houses the settings for the Engine:
Engine Manufacturer
Engine Model (optional depends on Engine Manufacture)
Engine Start Method
Show Ash Gauge
Show Soot Gauge
Show Regen Progress
Emission Settings

Related product manuals