Enovation Controls Murphy PowerView PV485 - Throttle Control and Speed Management; Throttle Settings and Methods

2021-0306-2507 34 00-02-1207
Frequency Input Pulse
This option allows the setting of the Frequency Input Pulse.
Throttle Settings
This menu item controls the parameters for the Throttle:
• Throttle Type
• Throttle Step
•
• Idle RPM
• Target RPM Type
• Throttle Method
• Preset Speed (if Throttle Type is Preset Speed)
• Switch throttle decrease input (if Throttle Type is Switch)
• Switch throttle increase input (if Throttle Type is Switch)
• Knob throttle input (if Throttle Type is Knob)
Throttle Type
This option allows the setting of the Throttle designation.
Menu Item
Description
J1939 TSC1
Operator can use this setting to throttle engine manually with
display’s push buttons.
Preset speed
Operator can select preconfigured speed with displays’ push button
or inputs as trigger.
Formatted: Centered
Formatted Table
Formatted: Font: Bold
Formatted: Font: Bold