Enovation Controls Murphy PowerView PV485 - Button Functions; Scrolling 12 Gauges

2021-0306-2507 9 00-02-1207
Button Functions
The table below explains the button functions when they appear on the screen.
Button Icon
Description
Go to menu password screen.
Throttle or digital gauge value decrease
Throttle or digital gauge value increase
Start engine
Stop engine
Next / Enter
Go to fault screen
Go to preset screen
Go to I/O status screen
Go to regeneration screen
Back
Select previous
Select next
Scrolling 12 Gauges
Pressing the button 5 (or Press and hold for 3 seconds if there are active DM1 faults) on the
main screen (, to reveal the next button hiden button will show up as shown example
in the image screen below) repeatedly will , press button 5 again will to cycle through all 12
chosen digital gauges.