Enovation Controls Murphy PowerView PV485 User Manual

2021-0306-2507 42 00-02-1207
Press Button 3 (RGBA) to move the highlight to change Red, Green, Blue, or Transparency
(Alpha) of the selected object.
Reset Default Color
To return the display to its factory default color(s).
Upload Splash Image
To upload a logo that will appear on the display as it boots up, follow these steps:
NOTE: To be compatible with the PV485 display, the uploaded image must be 480 x 272
pixels.
Step
Action
1
Select Customize Display Interface, then Upload Splash Image from the Main
Menu. Press Button 5 to select and enter.
2
The display will look for a USB memory device with images on it. Insert a USB
with the logo file. Refresh the screen if necessary.
3
Files on the USB that are .png, .jpg, .bmp or .gif will appear in a list. Press
Button 2 or 4 to highlight the appropriate file. Press Button 3 to confirm.
4
Press Button 1 to exit the menu. Power off/on to see the new splash screen.
Main Screen Gauge Setup
This menu option allows the establishment operator to set the parameter to be monitored by
each of the gauges on the main pageof the gauges being monitored by the display..

Enovation Controls Murphy PowerView PV485 Specifications

General

Brand	Enovation Controls
Model	Murphy PowerView PV485
Category	Monitor
Language	English