TS-12 Musician’s Manual Section 1 — Controls and Basic Functions
11
Using SoundFinder in Sounds Mode
Here’s how to select Programs that have the same defined Program Type in Sounds mode. For
this example, load the 120-PROGRAMS file called USERBNKS V2 from the TSD-200 disk that
came with your TS-12 before continuing with the following steps:
• Press the Sounds button.
• While holding down the BankSet button, press the Bank 0 button. This selects User RAM
BankSet U0.
• Press the Bank 0 button to select the first Bank in User RAM BankSet U0. The display shows:
• Press the upper middle soft button above GRAND-PIANO (it should now be underlined).
We’ll be listening to some of the TS-12 sounds that are assigned the same Program Type as
GRAND-PIANO.
• If you want to see which Program Type is assigned to a particular Program, press the Program
Control button. For GRAND-PIANO, the display shows:
• This display shows the PROGRAM TYPE assigned to the currently selected Program. The
Program Type assigned to GRAND-PIANO is ACPIANOS, which denotes acoustic pianos.
See Section 9 — Program Parameters for a complete listing of Program Types.
When GRAND-PIANO is selected, SoundFinder will allow us to view all Programs assigned
to the AC PIANOS Program Type.
• Press the Bank 0 button. GRAND-PIANO should still be selected (underlined). If it is not,
select it at this time.
• Double-click the Replace Track Sound button. Its LED should be lit.
• Press the Up Arrow button. The display now shows:
• BABY-GRAND (now underlined) is the next Program in the TS-12 assigned to the AC PIANOS
Program Type. You can play it if you wish.
To Next Page
Loading...
Need help?
General
