ensto EVB200EB-B4BC - Page 26

RAK139_ENG / 2023-09-14
26 / 36
Cybersecurity
• Ensto charging stations are designed to be safe to use according to relevant cybersecurity require-
ments, where regular security penetration tests are done and all the known vulnerabilities are miti-
gated.
• The manufacturer provides regular rmware updates. The responsibility to update the charger rm-
ware is under operator/owner/back-oce provider.
• The charging stations do not collect personal data and the manufacturer is not liable for personal
data, but this is in responsibility of the back-oce provider.
• The unique access password of the charging station can be changed. This action must be done dur-
ing the installation and commissioning to fulll cybersecurity act (for example EU) requirements. The
owner of the charging station must keep the valid passwords safe so that annual maintenance and
other activities, which are necessary to keep the charging station in operation, can be done.
Control and communication
Operation mode Standalone / Online
Wireless 4G/LTE
WiFi 2.4 GHz (IEEE802.11b/g/n)
2 radios (hotspot and client simultaneously)
Wired LAN / Ethernet
Protocol OCPP1.5-SOAP or OCPP1.6-JSON
Safety features
RCBO Type A 30mA, class C,nominal current 32A
Overvoltage and undervoltage
protection
Congurable
Control voltage 12 VDC
Temperature control High operating temperature, such as direct sunlight, can cause
reduced charging current or temporary interruption in the
charging procedure