RAK139_ENG / 2023-09-14
8 / 36
6. Mounting instructions
6.1. Before installation
Remove the charger and the extension box from their package. Do not scratch the surface of the items
after removal from the package.
When selecting installation site, take into consideration the following:
• The minimum space necessary for operating and maintenance.
• The mounting foundation is applicable and robust.
• To ensure the optimal charging performance, the charging station should not be exposed to direct
sunlight.
• If the charging station is installed in corrosive conditions where there is a risk of metal rusting, visible
metal surfaces must be protected regularly with anti-corrosion agent.
Obey national regulations and site
requirements
Recommendation
900 - 1200 mm
min. 400 mm
min. 200 mm
To Next Page
Loading...
