Enterasys 2H25x - Advanced Port Priority Configuration Screen Field Descriptions

Advanced Port Priority Configuration Screen
802.1 Configuration Menu Screens 6-15
Field Descriptions
Refer to Table 6-5 for a functional description of each screen field.
Table 6-5 Advanced Port Priority Configuration Screen Field Descriptions
Use this field… To…
Priority
(Read-Only)
See the list of the eight priorities, 0 through 7.
TX Queue
(Selectable)
Enable the frames with a certain priority to be mapped to transmit
according to one of four TX queues (0 through 3) with 0 being the
lowest transmit level. Refer to the following table for the TX Queue
default values according to frame priority.
To set the TX Mapping Queues, refer to Section 6.5.1.
RX Priority
(Read-Only)
See the eight priorities, 0 through 7.
Priority 01234567
TX Queue
10012233