SNMP Community Names Configuration Screen
4-22 Device Configuration Menu Screens
Field Descriptions
Refer to Table 4-5 for a functional description of each screen field.
Table 4-5 SNMP Community Names Configuration Screen Field Descriptions
Use this field… To…
Community Name
(Modifiable)
Enter the user-defined name through which a user accesses the
SmartSwitch device SNMP Management. Any community name
assigned here acts as a password to Local Management.
Access Policy
(Read-Only)
Indicate the access accorded each community name. The available
access levels are as follows:
read-only This community name gives the user read-only access
to the SmartSwitch device MIB objects, and excludes
access to security-protected fields of read-write or
super-user authorization.
read-write This community name gives the user read-write access
to the SmartSwitch device MIB objects, excluding
security protected fields for Super-User access only.
super-user This community name gives the user read-write access
to the SmartSwitch device
MIB objects and allows the
user to change all modifiable parameters including
community names, IP addresses, traps, and SNMP
objects.
To Next Page
Loading...
