Port Configuration Menu Screens 5-1
5
Port Configuration Menu Screens
This chapter describes the Port Configuration Menu screen and the following screens that may be
selected:
• Ethernet Interface Configuration screen (Section 5.2)
• Ethernet Port Configuration screen (Section 5.3)
• HSIM/VHSIM Configuration screen (Section 5.4)
• Redirect Configuration Menu screen (Section 5.5)
• Port Redirect Configuration screen (Section 5.6)
• VLAN Redirect Configuration screen (Section 5.7)
• SmartTrunk Configuration screen (Screens are described in the SmartTrunk User’s Guide.)
• Broadcast Suppression Configuration screen (Section 5.8)
Screen Navigation Path
Password > Device menu > Device Configuration Menu > Port Configuration Menu
5.1 PORT CONFIGURATION MENU SCREEN
When to Use
To select screens to perform port configuration tasks on the SmartSwitch device.
NOTE: If the operational mode of the device is set to SECURE FAST VLAN, the
following menu items will not display:
SMARTTRUNK CONFIGURATION
BROADCAST SUPPRESSION CONFIGURATION
Section 4.2.9 describes how to set the operational mode.
To Next Page
Loading...
