GARP Configuration Screen
GARP Configuration Menu Screens 8-5
Field Descriptions
Refer to Table 8-2 for a functional description of each screen field.
Table 8-2 GARP Configuration Screen Field Descriptions
Use this field… To…
Port #
(Read-Only)
See the number of front panel interfaces.
GMRP
(Toggle)
Set the port to operate as a GMRP-aware port. The setting is only valid
if the GMRP Protocol field near the bottom of the screen is set to
Enable. The GMRP field setting toggles between Y (yes) and N (no).
The default is “Y”.
To set the port, refer to Section 8.2.1.
GVRP
(Toggle)
Set one port to operate as a GVRP-aware port.
NOTE: Only ports set as hybrid ports may be configured as
GVRP ports. To set a port to the hybrid mode of operation, refer
to Section 7.4.
The setting is only valid if the GVRP Protocol field near the bottom of
the screen is set to Enable. The GMRP field setting toggles between Y
(yes) and N (no). The default is “Y”.
To set the port, refer to Section 8.2.1.
To Next Page
Loading...
