Protocol Port Configuration Screen
802.1 Configuration Menu Screens 6-39
Screen Example
Figure 6-9 Protocol Port Configuration Screen
Field Descriptions
Refer to Table 6-10 for a functional description of each screen field.
Table 6-10 Protocol Port Configuration Screen Field Descriptions
Use this field… To…
Classification Rule
(Read-Only)
See the Classification Rule (Priority, Classification, and Definition) of
the line selected on the Priority Classification Configuration screen.
For example, in Figure 6-9, the Classification Rule – 1, Ether II Type,
0x0800 (DOD IP) – was selected in the Priority Classification
Configuration screen to access the Protocol Port Configuration screen.
All ports with YES in the Classify columns would be those ports
associated with PID 1 with an Ether II Type Classification. This causes
Ether II Type frames received by those ports to be transmitted with a
priority value of 1 and according to the Classification Precedence
Rules.
3069_98
RETURN
EXITSAVE PREVIOUS
1 Ether II Type 0x0800 (DOD IP)
Port Classify Port Classify Port Classify Port Classify
1 [NO ] 9 [NO ] 17 [NO ] 25 [NO ]
2 [NO ] 10 [NO ] 18 [NO ] 26 [NO ]
3 [NO ] 11 [NO ] 19 [NO ] 27 [NO ]
4 [NO ] 12 [NO ] 20 [NO ] 28 [NO ]
5 [NO ] 13 [NO ] 21 [NO ] 29 [NO ]
6 [NO ] 14 [NO ] 22 NO 30 [NO ]
7 [NO ] 15 [NO ] 23 [NO ] 31 [NO ]
8 [NO ] 16 [NO ] 24 [NO ] 32 [NO ]
SET ALL PORTS: [NO ]
Classification Rule Field
NEXT
To Next Page
Loading...
